Filter :
Standard and/or project under the direct responsibility of ISO/TC 6/SC 2 Secretariat Stage ICS
Paper and board — Sampling to determine average quality
95.99
Paper and board — Sampling to determine average quality
95.99
Paper and board — Sampling to determine average quality
90.92
Paper and board — Sampling to determine average quality
20.00
Paper and board — Conditioning of samples
95.99
Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
95.99
Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
60.60
Paper and board — Determination of moisture content — Oven-drying method
95.99
Paper and board — Determination of moisture content of a lot — Oven-drying method
95.99
Paper and board — Determination of moisture content of a lot — Oven-drying method
90.92
Paper and board — Determination of moisture content of a lot — Oven-drying method
20.00
Paper — Determination of bulking thickness and apparent density
95.99
Paper and board — Determination of the thickness of single sheets (and method of calculation of the apparent density of board)
95.99
Paper and board — Determination of thickness and apparent bulk density or apparent sheet density
95.99
Paper and board — Determination of thickness, density and specific volume
95.99
Paper and board — Determination of thickness, density and specific volume
90.93
Paper and board — Determination of water absorption — Cobb method
95.99
Paper and board — Determination of water absorptiveness — Cobb method
95.99
Paper and board — Determination of water absorptiveness — Cobb method
95.99
Paper and board — Determination of water absorptiveness — Cobb method
60.60
Paper and board — Determination of grammage
95.99
Paper and board — Determination of grammage
95.99
Paper and board — Determination of grammage
95.99
Paper and board — Determination of grammage
90.20
Paper and board — Determination of tensile properties — Part 1: Constant rate of loading method
95.99
Paper and board — Determination of tensile properties — Part 1: Constant rate of loading method
95.99
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method
95.99
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method
95.99
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)
90.92
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)
20.00
Paper and board — Determination of tensile properties — Part 3: Constant rate of elongation method (100 mm/min)
90.93
Paper — Determination of tearing resistance
95.99
Paper — Determination of tearing resistance (Elmendorf method)
95.99
Paper — Determination of tearing resistance — Elmendorf method
90.93
Paper and board — Determination of ash
95.99
Paper and board — Determination of ash
95.99
Paper and board — Determination of bending resistance — Part 1: Constant rate of deflection
90.60
Paper and board — Determination of bending resistance — Part 2: Taber-type tester
95.99
Paper and board — Determination of resistance to bending — Part 2: Taber-type tester
60.60
Paper and board — Determination of stiffness — Static bending method
95.99
Paper and board — Determination of resistance to bending
95.99
Paper and board — Recommended procedure for the determination of roughness — Constant-pressure air-flow method
95.99
Sheet materials — Determination of water vapour transmission rate — Dish method
95.99
Sheet materials — Determination of water vapour transmission rate — Gravimetric (dish) method
95.99
Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
90.92
Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
20.60
Paper — Determination of bursting strength
95.99
Paper — Determination of bursting strength
95.99
Paper — Determination of bursting strength
90.93
Board — Determination of bursting strength
95.99
Board — Determination of bursting strength
95.99
Board — Determination of bursting strength
90.20
Corrugated fibreboard — Determination of thickness
95.99
Corrugated fibreboard — Determination of single sheet thickness
90.93
Single-faced and single-wall corrugated fibreboard — Determination of flat crush resistance
95.99
Corrugated fibreboard — Determination of flat crush resistance
90.92
Corrugated fibreboard — Determination of flat crush resistance
40.99
Board — Determination of puncture resistance
90.92
Board — Determination of puncture resistance using a pendulum device
50.00
Corrugated fibreboard — Determination of edgewise crush resistance
95.99
Corrugated fibreboard — Determination of edgewise crush resistance (Unwaxed edge method)
95.99
Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)
95.99
Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)
95.99
Corrugated fibreboard — Determination of edgewise crush resistance (non-waxed edge method)
60.60
Corrugated fibreboard — Determination of the water resistance of the glue bond by immersion
90.92
Corrugated fibreboard — Determination of the water resistance of the glue bond by immersion
20.00
Corrugated fibreboard — Determination of the grammage of the component papers after separation
95.99
Corrugated fibreboard — Determination of grammage of the component papers after separation
90.93
Paper and board — Determination of air resistance (Gurley)
95.99
Paper and board — Determination of bursting strength after immersion in water
95.99
Paper and board — Determination of bursting strength after immersion in water
60.60
Paper — Preparation of a letterpress print for test purposes
95.99
Paper and board — Determination of tensile strength after immersion in water
95.99
Paper and board — Determination of tensile strength after immersion in water
90.93
Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Pendulum or spring model)
95.99
Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Electric model)
95.99
Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester (electric model)
90.93
Paper — Determination of folding endurance
90.93
Paper — Determination of folding endurance
95.99
Paper and board — Determination of smoothness (Bekk method)
95.99
Paper and board — Determination of smoothness (Bekk method)
90.92
Paper and board — Determination of smoothness (Bekk method) — Technical Corrigendum 1
60.60
Paper and board — Determination of smoothness (Bekk method)
10.99
Paper and board — Determination of bending stiffness by static methods — General principles
95.99
Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
95.99
Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
90.93
Paper and board — Determination of bending stiffness — Resonance method
95.99
Paper and board — Determination of bending stiffness — Resonance method
90.93
Paper and board — Accelerated ageing — Part 1: Dry heat treatment
95.99
Paper and board — Accelerated ageing — Part 1: Dry heat treatment at 105 degrees C
90.93
Paper and board — Accelerated ageing — Part 2: Moist heat treatment at 90 degrees C and 25 % relative humidity
95.99
Paper and board — Accelerated ageing — Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity
95.99
Paper and board — Accelerated ageing — Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity
90.93
Paper and board — Accelerated ageing — Part 4: Dry heat treatment at 120 or 150 degrees C
90.93
Paper and board — Accelerated ageing — Part 5: Exposure to elevated temperature at 100 degrees C
90.93
Paper and board — Accelerated ageing — Part 6: Exposure to atmospheric pollution (nitrogen dioxide)
90.93
Paper and board — Accelerated ageing — Part 7: Exposure to light
95.99
Paper and board — Determination of resistance to water penetration
90.93
Paper and board — Determination of grease resistance
95.99
Paper and board — Determination of grease resistance — Technical Corrigendum 1
95.99
Paper — Measurement of dimensional change after immersion in water
90.93
Paper and board — Determination of air permeance (medium range) — Part 1: General method
95.99
Paper and board — Determination of air permeance (medium range) — Part 2: Schopper method
95.99
Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
95.99
Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
95.99
Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
90.93
Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method
95.99
Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method
95.99
Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method
90.93
Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method
95.99
Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method — Technical Corrigendum 1
95.99
Paper and board — Determination of air permeance and air resistance (medium range) — Part 5: Gurley method
95.99
Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method
90.93
Paper and board — Determination of air permeance (medium range) — Part 6: Oken method
90.93
Paper and board — Determination of water absorption and increase in thickness after immersion in water
95.99
Paper and board — Determination of water absorption after immersion in water
95.99
Paper and board — Determination of water absorption after immersion in water
60.60
Solid fibreboard — Determination of grammage of single layers
90.93
Paper, board and pulps — Units for expressing properties
95.99
Paper, board and pulps — Units for expressing properties
95.99
Corrugating medium — Determination of the flat crush resistance after laboratory fluting — Part 1: A-flute
90.93
Corrugating medium — Determination of the flat crush resistance after laboratory fluting — Part 2: B-flute
90.93
Corrugating medium — Determination of the flat crush resistance after laboratory fluting
95.99
Corrugating medium — Determination of the flat crush resistance after laboratory fluting
95.99
Corrugating medium — Determination of the flat crush resistance after laboratory fluting
95.99
Corrugating medium — Determination of the flat crush resistance after laboratory fluting
95.99
Testing of paper and board — Compressive strength of a sample held in S-shape
60.60
Paper and board — Measurement of hygroexpansivity — Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %
95.99
Paper and board — Measurement of hygroexpansivity — Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %
90.93
Paper and board — Measurement of hygroexpansivity — Part 2: Hygroexpansivity up to a maximum relative humidity of 86 %
90.93
Paper and board — Determination of microbiological properties — Part 1: Total bacterial count
95.99
Pulp, paper and board — Microbiological examination — Part 1: Total count of bacteria, yeast and mould based on disintegration
95.99
Pulp, paper and board — Microbiological examination — Part 1: Enumeration of bacteria and bacterial spores based on disintegration
90.93
Pulp, paper and board — Microbiological examination — Part 2: Enumeration of bacteria, yeast and mould on surface
60.60
Pulp, paper and board — Microbiological examination — Part 3: Enumeration of yeast and mould based on disintegration
60.60
Paper and board — Determination of capillary rise — Klemm method
90.93
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 1: General method
95.99
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
95.99
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
90.93
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
95.99
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
95.99
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
90.93
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method
95.99
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method
95.99
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method
60.60
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 5: Oken method
60.60
Paper and board — Compressive strength — Short span test
95.99
Paper and board — Compressive strength — Short-span test
90.93
Paper and board — Determination of water vapour transmission rate of sheet materials — Dynamic sweep and static gas methods
95.99
Paper and board — Determination of water vapour transmission rate of sheet materials — Dynamic sweep and static gas methods
60.60
Paper and board — Determination of air permeance — Low range
95.99
Paper and board — Determination of curl using a single vertically suspended test piece
95.99
Paper and board — Determination of curl using a single vertically suspended test piece — Technical Corrigendum 1
95.99
Paper and board — Determination of curl using a single vertically suspended test piece
90.93
Paper and board — Calibration of variable-area flowmeters
95.99
Paper and board — Compressive strength — Ring crush method
95.99
Paper and board — Determination of compressive strength — Ring crush method
90.93
Tissue paper and tissue products — Part 1: General guidance on terms
95.99
Tissue paper and tissue products — Part 1: General guidance on terms
95.99
Tissue paper and tissue products — Part 1: Vocabulary
90.93
Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density
95.99
Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
90.93
Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at break and tensile energy absorption
95.99
Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
95.99
Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
60.60
Tissue paper and tissue products — Part 5: Determination of wet tensile strength
95.99
Tissue paper and tissue products — Part 5: Determination of wet tensile strength
95.99
Tissue paper and tissue products — Part 5: Determination of wet tensile strength
60.60
Tissue paper and tissue products — Part 6: Determination of grammage
95.99
Tissue paper and tissue products — Part 6: Determination of grammage
90.93
Tissue paper and tissue products — Part 7: Determination of optical properties
95.99
Tissue paper and tissue products — Part 7: Determination of optical properties — Measurement of brightness and colour with D65/10° (outdoor daylight)
95.99
Tissue paper and tissue products — Part 7: Determination of optical properties — Measurement of brightness and colour with D65/10° (outdoor daylight)
60.60
Tissue paper and tissue products — Part 8: Water-absorption time and water-absorption capacity, basket- immersion test method
95.99
Tissue paper and tissue products — Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
90.93
Tissue paper and tissue products — Part 9: Determination of ball burst strength
95.99
Tissue paper and tissue products — Part 9: Determination of ball burst strength
90.93
Tissue paper and tissue products — Part 11: Determination of wet ball burst strength
95.99
Tissue paper and tissue products — Part 11: Determination of wet ball burst strength
90.93
Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines — Calculation of perforation efficiency
95.99
Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines and calculation of perforation efficiency
60.60
Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant
95.99
Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant
60.60
Tissue paper and tissue products — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflectance method
95.99
Tissue paper and tissue products — Part 16: Determination of optical properties — Diffuse reflectance method for opacity (paper backing)
60.60
Tissue paper and tissue products — Part 17: Determination of disintegration in water
60.60
Tissue paper and tissue products — Part 18: Determination of surface friction
60.60
Paper, board and corrugated fibreboard — Description and calibration of compression-testing equipment
95.99
Paper, board and corrugated fibreboard — Description and calibration of compression-testing equipment
95.99
Paper, board and corrugated fibreboard — Description and calibration of fixed platen compression-testing equipment
60.60
Corrugated fibreboard — Determination of edgewise crush resistance — Waxed edge method
95.99
Corrugated fibreboard — Determination of edgewise crush resistance — Waxed edge method
60.60
Paper and board — Measurement of water contact angle by optical methods
90.93
Paper and board — Cut-size office paper — Measurement of curl in a pack of sheets
95.99
Paper and board — Cut-size office paper — Measurement of curl in a pack of sheets
60.60
Paper and board — Determination of the static and kinetic coefficients of friction — Horizontal plane method
90.93
Paper and board — Determination of z-directional tensile strength
90.93
Paper and board — Estimation of contraries
95.99
Paper and board — Determination of internal bond strength
90.92
Paper and board — Determination of internal bond strength
40.60
Paper and board — Determination of grease resistance — Part 1: Permeability test
90.93
Paper and board — Determination of grease resistance — Part 2: Surface repellency test
90.93
Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and greaseproof papers
90.93
Corrugating medium — Determination of the edge crush resistance after laboratory fluting
90.60
Paper and board — Determination of fracture toughness — Constant rate of elongation method (1,7 mm/s)
90.93
Paper, board and printing inks – Printability – Laboratory test method for offset ink setting
90.93
Paper — Requirements for stability for general graphic applications
90.93
Paper — Cut-size office paper — Measurement of edge quality
90.93
Paper, board and graphic technology — Determination of the coating strength in the inner fold
60.60
Paper and board — Stylus contact method — Part 1: Determination of surface roughness
60.60

No matching records found. Please try changing the filter settings.