Filter :
Standard and/or project | Stage | TC |
---|---|---|
Plain bearings made from sintered material — Dimensions and tolerances |
95.99 | ISO/TC 123 |
Plain bearings made from sintered material — Dimensions and tolerances |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Sintered bushes — Dimensions and tolerances |
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Sintered bushes — Dimensions and tolerances |
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Sintered bushes — Dimensions and tolerances |
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Wrapped bushes — Part 1: Dimensions |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 1: Dimensions |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 1: Dimensions |
90.20 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameter |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters |
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 3: Lubrication holes, lubrication grooves and lubrication indentations |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 3: Lubrication holes, grooves and indentations |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 3: Lubrication holes, grooves and indentations |
90.93 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 4: Materials |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 4: Materials |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 4: Materials |
90.60 | ISO/TC 123/SC 3 |
Plain bearings — Wrapped bushes — Part 5: Checking the outside diameter |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Part 5: Checking the outside diameter |
60.60 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Part 6: Checking the inside diameter |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Part 6: Checking the inside diameter |
60.60 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Part 7: Measurement of wall thickness of thin-walled bushes |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Part 7: Measurement of wall thickness of thin-walled bushes |
60.60 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Dimensions, tolerances and methods of checking |
95.99 | ISO/TC 123 |
Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and methods of test |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and methods of test |
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and methods of test — Amendment 1 |
40.60 | ISO/TC 123/SC 3 |
Plain bearings — Thin-walled half bearings with or without flange — Part 2: Measurement of wall thickness and flange thickness |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Thin-walled half bearings with or without flange — Part 2: Measurement of wall thickness and flange thickness |
60.60 | ISO/TC 123/SC 5 |
Plain bearings — Thin-walled half bearings with or without flange — Part 3: Measurement of peripheral length |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Thin-walled half bearings with or without flange — Part 3: Determination of the peripheral length |
60.60 | ISO/TC 123/SC 5 |
Plain bearings — Thin-walled half bearings — Dimensions, tolerances and methods of checking |
95.99 | ISO/TC 123 |
Plain bearings — Thin-walled half bearings with or without flange — Tolerances, design features and methods of test |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Shaft diameters for unsplit bushes |
95.99 | ISO/TC 123 |
Plain bearings — Terms, definitions and classification — Part 1: Design, bearing materials and their properties |
95.99 | ISO/TC 123 |
Plain bearings — Terms, definitions and classification — Part 1: Design, bearing materials and their properties |
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 1: Design, bearing materials and their properties |
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 1: Design, bearing materials and their properties |
90.92 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 1: Design, bearing materials and their properties |
30.60 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions and classification — Part 2: Friction and wear |
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 2: Friction and wear |
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 2: Friction and wear |
90.92 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 2: Friction and wear |
30.60 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions and classification — Part 3: Lubrication |
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 3: Lubrication |
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 3: Lubrication |
90.92 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 3: Lubrication |
30.60 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions and classification — Part 4: Calculation parameters and their symbol |
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 4: Basic symbols |
90.93 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 5: Application of symbols |
90.93 | ISO/TC 123/SC 6 |
Plain bearings — Terms, definitions, classification and symbols — Part 6: Abbreviated terms |
60.60 | ISO/TC 123/SC 6 |
Plain bearings — Solid copper alloy bushes _ Dimensions and tolerances |
95.99 | ISO/TC 123 |
Plain bearings — Copper alloy bushes |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Copper alloy bushes |
90.92 | ISO/TC 123/SC 3 |
Plain bearings — Copper alloy bushes |
40.60 | ISO/TC 123/SC 3 |
Plain bearings — Lead and tin casting alloys for multilayer plain bearings |
95.99 | ISO/TC 123 |
Plain bearings — Lead and tin casting alloys for multilayer plain bearings |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Lead and tin casting alloys for multilayer plain bearings |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Tin casting alloys for multilayer plain bearings |
90.20 | ISO/TC 123/SC 2 |
Plain bearings — Copper alloys — Part 1: Cast copper alloys for solid and multilayer plain bearings |
95.99 | ISO/TC 123 |
Plain bearings — Copper alloys — Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Copper alloys — Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings |
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Copper alloys — Part 2: Wrought copper alloys for solid plain bearings |
95.99 | ISO/TC 123 |
Plain bearings — Copper alloys — Part 2: Wrought copper alloys for solid plain bearings |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Copper alloys — Part 2: Wrought copper alloys for solid plain bearings |
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer materials for thin-walled plain bearings |
95.99 | ISO/TC 123 |
Plain bearings — Multilayer materials for thin-walled plain bearings |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Multilayer materials for thin-walled plain bearings |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Multilayer materials for thin-walled plain bearings |
90.93 | ISO/TC 123/SC 2 |
Plain bearings — Multilayer materials for thin-walled plain bearings |
40.98 | ISO/TC 123/SC 2 |
Plain bearings — Hardness testing of bearing metals — Part 1: Compound materials |
95.99 | ISO/TC 123 |
Plain bearings — Hardness testing of bearing metals — Part 1: Compound materials |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Hardness testing of bearing metals — Part 1: Multilayer bearings materials |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Hardness testing of bearing metals — Part 1: Multilayer bearings materials |
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials |
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Compression testing of metallic bearing materials |
90.92 | ISO/TC 123/SC 2 |
Plain bearings — Compression testing of metallic bearing materials |
30.99 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of bond for bearing metal layer thicknesses equal to or greater than 2 mm |
95.99 | ISO/TC 123 |
Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of bond |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm |
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm |
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 3: Non-destructive penetrant testing |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Metallic multilayer plain bearings — Part 3: Non-destructive penetrant testing |
90.20 | ISO/TC 123/SC 2 |
Plain bearings — Dynamic adhesion test method for DLC coated parts under lubricated condition |
60.60 | ISO/TC 123/SC 7 |
Sintered metal materials — Specifications — Part 1: Materials, for bearings, impregnated with liquid lubricant |
95.99 | ISO/TC 119 |
Sintered metal materials — Specifications — Part 1: Materials, for bearings, impregnated with liquid lubricant |
95.99 | ISO/TC 119 |
Spherical plain radial bearings, joint type — Boundary dimensions — Part 1: Dimension series E and G |
95.99 | ISO/TC 4 |
Spherical plain radial bearings, joint type — Boundary dimensions — Part 1: Dimension series E and G |
95.99 | ISO/TC 4/SC 7 |
Spherical plain radial bearings, joint type — Boundary dimensions — Part 2: Dimension series EW, bearings with extended inner ring |
95.99 | ISO/TC 4/SC 7 |
Spherical plain radial bearings, joint type — Boundary dimensions — Part 3: Dimension series C |
95.99 | ISO/TC 4/SC 7 |
Withdrawal of ISO 6124-1979 |
95.99 | ISO/TC 4 |
Spherical plain radial bearings; joint type — Tolerances |
95.99 | ISO/TC 4/SC 7 |
Spherical plain bearing rod ends — Dimension series E and JK — Boundary dimensions and tolerances |
95.99 | ISO/TC 4/SC 7 |
Spherical plain bearing rod ends — Dimension series E and JK — Boundary dimensions and tolerances |
95.99 | ISO/TC 4/SC 7 |
Plain bearings — Aluminium alloy for solid bearings |
95.99 | ISO/TC 123 |
Plain bearings — Aluminium alloys for solid bearings |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Aluminium alloys for solid bearings |
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Requirements on backings for thick-walled multilayer bearings |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Requirements and guidance on backings for thick-walled multilayer bearings |
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Testing under conditions of hydrodynamic and mixed lubrication in test rigs |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing under conditions of hydrodynamic and mixed lubrication in test rigs — Guidelines |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing under conditions of hydrodynamic and mixed lubrication in test rigs |
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Metallic thin-walled half bearings — Determination of the sigma 0,01*-limit |
95.99 | ISO/TC 123/SC 2 |
Withdrawal of ISO/TR 6282-1979 |
95.99 | ISO/TC 123 |
Plain bearings — Metallic thin-walled half bearings — Determination of the sigma 0,01*-limit |
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Methods of dimensional control — Peripherical length checking of thin-walled half bearings |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Thin-walled half-bearings — Checking of peripheral length |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Ring type thrust washers made from strip — Dimensions and tolerances |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Ring type thrust washers made from strip — Dimensions and tolerances |
90.20 | ISO/TC 123/SC 3 |
Plain bearings — Pressed bimetallic half thrust washers — Features and tolerances |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Pressed bimetallic half thrust washers — Features and tolerances |
90.60 | ISO/TC 123/SC 3 |
Thermoplastics for plain bearings — Classification and designation |
95.99 | ISO/TC 123/SC 2 |
Thermoplastic polymers for plain bearings — Classification and designation |
95.99 | ISO/TC 123/SC 2 |
Thermoplastic polymers for plain bearings — Classification and designation |
60.60 | ISO/TC 123/SC 2 |
Spherical plain bearings — Vocabulary |
95.99 | ISO/TC 4/SC 7 |
Spherical plain bearings — Vocabulary |
90.93 | ISO/TC 4/SC 7 |
Spherical plain bearings — Vocabulary — Technical Corrigendum 1 |
60.60 | ISO/TC 4/SC 7 |
Plain bearings — Thermo-hydrodynamic lubrication design charts for circular cylindrical bearings under steady-state conditions |
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Thin-walled flanged half bearings — Dimensions, tolerances and methods of checking |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 1: General |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 1: General |
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 2: Cavitation erosion and its countermeasures |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 2: Cavitation erosion and its countermeasures |
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Terms, characteristics and causes of damage and changes in appearance |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of plastics |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of the friction and wear behaviour of bearing material/mating material/oil combinations under conditions of boundary lubrication |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of bearing metals |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of bearing metals |
90.93 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of bearing metals |
40.98 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of polymer-based bearing materials |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of polymer-based bearing materials |
90.93 | ISO/TC 123/SC 2 |
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of polymer-based bearing materials |
40.98 | ISO/TC 123/SC 2 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure |
95.99 | ISO/TC 123 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure |
95.99 | ISO/TC 123/SC 8 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure |
60.60 | ISO/TC 123/SC 8 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 2: Functions used in the calculation procedure |
95.99 | ISO/TC 123/SC 8 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 2: Functions used in the calculation procedure |
60.60 | ISO/TC 123/SC 8 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 3: Permissible operational parameters |
95.99 | ISO/TC 123/SC 8 |
Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 3: Permissible operational parameters |
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Symbols — Part 1: Basic symbols |
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Symbols — Part 2: Applications |
95.99 | ISO/TC 123/SC 6 |
Plain bearings — Bearing fatigue — Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication |
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 2: Test with a cylindrical specimen of a metallic bearing material |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 2: Test with a cylindrical specimen of a metallic bearing material |
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 3: Test on plain strips of a metallic multilayer bearing material |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 3: Test on plain strips of a metallic multilayer bearing material |
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 4: Tests on half-bearings of a metallic multilayer bearing material |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Bearing fatigue — Part 4: Tests on half-bearings of a metallic multilayer bearing material |
60.60 | ISO/TC 123/SC 2 |
Plain bearings — Evaluation of the tribological properties of polymer-based materials |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Water-lubricated plain bearing materials |
40.00 | ISO/TC 123/SC 7 |
Plain bearings — Testing of the tribological behaviour of bearing materials for oil lubrication application — Running-in under mixed lubrication conditions |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions |
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions |
90.60 | ISO/TC 123/SC 2 |
Plain bearings — Pedestal plain bearings — Part 1: Pillow blocks |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Pedestal plain bearings — Part 1: Pillow blocks |
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Pedestal plain bearings — Part 2: Side flange bearings |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Pedestal plain bearings — Part 2: Side flange bearings |
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Pedestal plain bearings — Part 3: Centre flange bearings |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Pedestal plain bearings — Part 3: Centre flange bearings |
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Lubrication holes, grooves and pockets — Dimensions, types, designation and their application to bearing bushes |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Lubrication holes, grooves and pockets — Dimensions, types, designation and their application to bearing bushes |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Lubrication holes, grooves and pockets — Dimensions, types, designation and their application to bearing bushes |
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Part 1: Fits |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Tolerances — Part 1: Fits |
90.92 | ISO/TC 123/SC 3 |
Plain bearings — Tolerances — Part 1: Fits |
40.60 | ISO/TC 123/SC 3 |
Plain bearings — Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Tolerances — Part 2: Tolerances on form and position and surface roughness for shafts and thrust collars |
60.60 | ISO/TC 123/SC 3 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 1: Calculation of tilting pad thrust bearings |
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 1: Calculation of tilting pad thrust bearings |
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2: Functions for calculation of tilting pad thrust bearings |
95.99 | ISO/TC 123 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2: Functions for calculation of tilting pad thrust bearings |
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2: Functions for calculation of tilting pad thrust bearings |
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 3: Guide values for the calculation of tilting pad thrust bearings |
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 3: Guide values for the calculation of tilting pad thrust bearings |
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 1: Calculation of thrust pad bearings |
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 1: Calculation of thrust pad bearings |
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 2: Functions for the calculation of thrust pad bearings |
95.99 | ISO/TC 123 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 2: Functions for the calculation of thrust pad bearings |
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 2: Functions for the calculation of thrust pad bearings |
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 3: Guide values for the calculation of thrust pad bearings |
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 3: Guide values for the calculation of thrust pad bearings |
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Quality assurance of thin- walled half bearings — Design FMEA |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality assurance of thin-walled half bearings — Design FMEA |
90.92 | ISO/TC 123/SC 5 |
Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves |
95.99 | ISO/TC 123 |
Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves |
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves |
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves |
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves |
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves |
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves |
60.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves |
95.99 | ISO/TC 123/SC 8 |
Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves |
60.60 | ISO/TC 123/SC 8 |
Spherical plain bearings — Part 1: Radial spherical plain bearings |
90.93 | ISO/TC 4/SC 7 |
Spherical plain bearings — Part 2: Angular contact radial spherical plain bearings |
90.93 | ISO/TC 4/SC 7 |
Spherical plain bearings — Part 3: Thrust spherical plain bearings |
90.93 | ISO/TC 4/SC 7 |
Spherical plain bearings — Part 4: Spherical plain bearing rod ends |
90.93 | ISO/TC 4/SC 7 |
Spherical plain bearings — Part 4: Spherical plain bearing rod ends — Technical Corrigendum 1 |
60.60 | ISO/TC 4/SC 7 |
Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics — Technical Corrigendum 1 |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics |
90.93 | ISO/TC 123/SC 5 |
Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics |
30.98 | ISO/TC 123/SC 5 |
Plain bearings — Quality characteristics — Statistical process control (SPC) |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality characteristics — Statistical process control (SPC) |
90.60 | ISO/TC 123/SC 5 |
Plain bearings — Quality characteristics — Calculation of machine and process capabilities |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Wrapped bushes — Part 1: Checking the outside diameter |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Checking of wrapped bushes — Part 2: Checking the inside diameter |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality assurance — Sample types — Definitions, applications and testing |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality assurance of sample types — Definitions, applications and testing |
90.60 | ISO/TC 123/SC 5 |
Plain bearings — Reuse, recycling and disposal of plain bearing materials |
40.00 | ISO/TC 123/SC 6 |
Plain bearings — Quality assurance of thin-walled half bearings — Selective assembly of bearings to achieve a narrow clearance range |
95.99 | ISO/TC 123/SC 5 |
Plain bearings — Quality assurance of thin-walled half bearings — Selective assembly of bearings to achieve a narrow clearance range |
90.93 | ISO/TC 123/SC 5 |
Foil bearings — Guidelines for testing of the performance of foil journal bearings —Testing of load capacity, friction coefficient and lifetime |
95.99 | ISO/TC 123/SC 7 |
Foil bearings — Performance testing of foil journal bearings — Testing of static load capacity, friction coefficient and lifetime |
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Pad materials for tilting pad bearings |
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Pad materials for tilting pad bearings |
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Pad materials for tilting pad bearings |
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Thermoplastic bushes — Dimensions and tolerances |
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Thermoplastic bushes — Dimensions and tolerances |
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Lubrication characteristics of crosshead pin bearings for low-speed marine diesel engines |
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Bearings with embedded solid lubricants |
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Bearings with embedded solid lubricants |
60.60 | ISO/TC 123/SC 7 |
Plain bearings with liquid lubrication — Lubricant supply arrangements and monitoring |
60.60 | ISO/TC 123/SC 3 |
Spherical plain bearings — Derivation of the load rating factors |
60.60 | ISO/TC 4/SC 8 |
Plain bearings — Bearings containing dispersed solid lubricants |
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Bearings containing dispersed solid lubricants |
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Handling of plain bearings |
60.60 | ISO/TC 123/SC 6 |
Plain bearings — Spray nozzle type directed lubrication for tilting pad bearings |
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Automotive engine bearing test rig using actual connecting rods — Part 1: Test rig |
60.60 | ISO/TC 123/SC 2 |
Foil bearings — Performance testing of foil thrust bearings — Testing of static load capacity, bearing torque, friction coefficient and lifetime |
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Fluid film bearing materials for vehicular turbocharger |
95.99 | ISO/TC 123/SC 7 |
Plain bearings — Fluid film bearing materials for vehicular turbocharger |
60.60 | ISO/TC 123/SC 7 |
Plain bearings — Surface modification by press fitting solid lubricants combined with micro dimple processing |
60.60 | ISO/TC 123/SC 7 |
Spherical plain bearings — Spherical plain bearings rod ends for hydraulic fluid power cylinders |
60.60 | ISO/TC 4/SC 7 |
Plain bearings — Recommendations for automotive crankshaft bearing environments |
95.99 | ISO/TC 123/SC 3 |
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 1: Calculation of multi-lobed and tilting pad journal bearings |
90.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 2: Functions for calculation of multi-lobed journal bearings |
90.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 3: Functions for calculation of tilting pad journal bearings |
90.60 | ISO/TC 123/SC 8 |
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 4: Permissible operational parameters for calculation of multi-lobed and tilting pad journal bearings |
90.60 | ISO/TC 123/SC 8 |
No matching records found. Please try changing the filter settings.