Filtrar :
Norma o proyecto | Etapa | TC |
---|---|---|
Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of viscosity number in dilute solution
|
95.99 | ISO/TC 61 |
Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures — Part 1: Congo red method
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures — Part 2: pH method
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures — Part 3: Conductometric method
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures — Part 3: Conductometric method
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures — Part 4: Potentiometric method
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Determination of the thermal stability of polyvinyl chloride and related copolymers and their compounds by splitting off of hydrogen chloride
|
95.99 | ISO/TC 61 |
Plastics — Compression moulding test specimens of thermoplastic materials
|
95.99 | ISO/TC 61 |
Plastics — Compression moulding test specimens of thermoplastic materials
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Compression moulding of test specimens of thermoplastic materials
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Compression moulding of test specimens of thermoplastic materials
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens — Amendment 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens — Amendment 2: Methods of determining the hold pressure and hold time
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars — Amendment 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates — Amendment 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy — Amendment 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy
|
90.92 | ISO/TC 61/SC 9 |
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy
|
30.60 | ISO/TC 61/SC 9 |
Plastics — Injection moulding test specimens of thermoplastic materials
|
95.99 | ISO/TC 61 |
Plastics — Injection moulding of test specimens of thermoplastic materials
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of thermal stability of polyvinyl chloride, related chlorine-containing polymers and copolymers, and their compounds — Discoloration method
|
95.99 | ISO/TC 61 |
Plastics — Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds — Discoloration method
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds — Discoloration method
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Determination of the Vicat softening temperature of thermoplastics
|
95.99 | ISO/TC 61 |
Plastics — Thermoplastic materials — Determination of Vicat softening temperature
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Determination of viscosity number of polyamides in dilute solution
|
95.99 | ISO/TC 61 |
Plastics — Polyamides — Determination of viscosity number
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamides — Determination of viscosity number
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamides — Determination of viscosity number
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamides — Determination of viscosity number
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamides — Determination of viscosity number — Amendment 1: Corrections, and update to reference to JIS K 6920-2
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamides — Determination of viscosity number
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Determination of stiffness in torsion of flexible materials — Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
|
90.93 | ISO/TC 61/SC 2 |
Plastics - Non-plasticized cellulose acetate - Determination of moisture content
|
95.99 | ISO/TC 61 |
Plastics — Unplasticized cellulose acetate — Determination of moisture content
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Polyamides — Determination of matter extractable by boiling methanol
|
95.99 | ISO/TC 61 |
Plastics — Polyamide homopolymers — Determination of matter extractable by boiling methanol
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of ash of unplasticized cellulose acetate
|
95.99 | ISO/TC 61 |
Plastics — Polyamides (PA) — Determination of water content
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of the water content in polyamides
|
95.99 | ISO/TC 61 |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Determination of properties
|
95.99 | ISO/TC 61 |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Preparation of test samples and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Withdrawal of ISO 1060-1975
|
95.99 | ISO/TC 61 |
Plastics — Unplasticized cellulose acetate — Determination of free acidity
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Unplasticized cellulose acetate — Determination of free acidity
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of compacted apparent bulk density
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Polyamide 66, 610 and 6 — Accelerated conditioning of test specimens
|
95.99 | ISO/TC 61 |
Plastics — Polyamides — Accelerated conditioning of test specimens
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamides — Accelerated conditioning of test specimens
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamides — Accelerated conditioning of test specimens
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 2: Method for materials sensitive to time-temperature history and/or moisture
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio
|
95.99 | ISO/TC 61 |
Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine
|
95.99 | ISO/TC 61 |
Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine content
|
90.92 | ISO/TC 61/SC 9 |
Plastics — Vinyl chloride-vinyl acetate copolymers — Determination of vinyl acetate
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Unplasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation
|
95.99 | ISO/TC 61 |
Plastics — Unplasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Unplasticized compounds of homopolymers and copolymers of vinyl chloride — Part 2: Determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyethylenes and polypropylenes in dilute solution — Determination of viscosity number and of limiting viscosity number
|
95.99 | ISO/TC 61 |
Plastics — Polyamides — Determination of "melting point"
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Poly(ethylene terephthalate) in dilute solution — Determination of viscosity number
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of pH of aqueous extract
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Polyvinyl chloride resins — Determination of number of impurities and foreign particles
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(vinyl chloride) resins — Determination of number of impurities and foreign particles
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of volatile matter (including water)
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of volatile matter (including water)
|
90.20 | ISO/TC 61/SC 9 |
Plastics — PVC resins — Determination of ash and sulphated ash
|
95.99 | ISO/TC 61 |
Plastics — Unplasticized cellulose acetate — Determination of acetic acid yield
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Unplasticized cellulose acetate — Determination of acetic acid yield
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Cellulose acetate — Determination of insoluble particles
|
95.99 | ISO/TC 61/SC 9 |
Plastics - Cellulose acetate — Determination of insoluble particles
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Cellulose acetate — Determination of viscosity loss on moulding
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Cellulose acetate — Determination of viscosity loss on moulding
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Cellulose acetate — Determination of light absorption before and after heating
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Cellulose acetate — Determination of light absorption on moulded specimens produced using different periods of heating
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Polystyrene (PS) moulding and extrusion materials — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polystyrene (PS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polystyrene (PS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polystyrene moulding and extrusion materials — Part 2: Determination of properties
|
95.99 | ISO/TC 61 |
Plastics — Polystyrene (PS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polystyrene moulding and extrusion materials — Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Vinyl chloride homopolymer and copolymer resins — Sieve analysis in water
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Vinyl chloride homopolymer and copolymer resins — Sieve analysis in water
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Determination of viscosity number and limiting viscosity number — Part 2: Poly(vinyl chloride) resins
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 2: Poly(vinyl chloride) resins
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 2: Poly(vinyl chloride) resins
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Determination of viscosity number and limiting viscosity number — Part 3: Polyethylenes and polypropylenes
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of viscosity number and limiting viscosity number — Part 3: Polyethylenes and polypropylenes — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 3: Polyethylenes and polypropylenes
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 3: Polyethylenes and polypropylenes
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 4: Polycarbonate (PC) moulding and extrusion materials
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 4: Polycarbonate (PC) moulding and extrusion materials
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Determination of viscosity number and limiting viscosity number — Part 5: Poly(alkylene terephthalates)
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of viscosity number and limiting viscosity number — Part 6: Methyl methacrylate polymers
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Polyethylene (PE) and ethylene copolymer thermoplastics — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyethylene (PE) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyethylene (PE) and ethylene copolymer thermoplastics — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amendment 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Polyethylene thermoplastic materials — Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amendment 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamide (PA) homopolymers for moulding and extrusion — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system and basis for specification
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amendment 1: Laser sintering of specimens
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Specification for polyamide homopolymers
|
95.99 | ISO/TC 61 |
Plastics — Plasticized cellulose acetate — Determination of matter extractable by diethyl ether
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 1: Test specimens in the form of parallelepipedic bars (Injection moulding and compression moulding)
|
95.99 | ISO/TC 61 |
Plastics — Amorphous thermoplastics — Preparation of test specimens with a specified maximum reversion — Part 1: Bars
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 2: Test specimens in the form of rectangular plates (Injection moulding)
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Amorphous thermoplastics — Preparation of test specimens with a specified reversion — Part 2: Plates
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of residual styrene monomer in polystyrene by gas chromatography
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Thermosetting moulding materials — Determination of shrinkage of compression moulded test specimens in the form of bars
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1: Designation
|
95.99 | ISO/TC 61 |
Plastics — Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials — Part 2: Determination of properties
|
95.99 | ISO/TC 61 |
Plastics — Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Impact-resistant polystyrene (SB) moulding and extrusion materials — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Impact-resistant polystyrenes — Part 2: Determination of properties
|
95.99 | ISO/TC 61 |
Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Designation of impact-resistant polystyrenes
|
95.99 | ISO/TC 61 |
Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation
|
95.99 | ISO/TC 61 |
Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P) — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride — Part 2: Determination of properties
|
95.99 | ISO/TC 61 |
Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P) — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of ash — Part 2: Polyalkylene terephthalates
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of ash — Part 2: Poly(alkylene terephthalate) materials
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of ash — Part 3: Unplasticized cellulose acetate
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of ash — Part 4: Polyamides
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of ash — Part 4: Polyamides
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of ash — Part 4: Polyamides
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of ash — Part 5: Poly(vinyl chloride)
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of ash — Part 5: Poly(vinyl chloride)
|
90.92 | ISO/TC 61/SC 5 |
Plastics — Determination of ash — Part 5: Poly(vinyl chloride)
|
40.60 | ISO/TC 61/SC 5 |
Plastics — Polypropylene granules — Determination of thermal stability in air by pH method
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Aqueous dispersions of homopolymers and copolymers of vinyl acetate — Determination of bromine number
|
95.99 | ISO/TC 61/SC 9 |
Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength
|
40.20 | ISO/TC 138/SC 5 |
Polysulfone (PSU) — Effect of time and temperature on expected strength
|
40.20 | ISO/TC 138/SC 5 |
Plastics — Polyethylene (PE) — Determination of co-monomer content by solution state 13C-NMR spectrometry
|
90.92 | ISO/TC 61/SC 9 |
Plastics — Polyethylene (PE) — Determination of co-monomer content by solution state 13C-NMR spectrometry
|
40.99 | ISO/TC 61/SC 9 |
Plastics — PVC resins for general use — Determination of hot plasticizer absorption
|
95.99 | ISO/TC 61/SC 9 |
Plastics — PVC resins for general use — Determination of hot plasticizer absorption
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Polyvinyl chloride pastes — Determination of apparent viscosity using the Severs rheometer
|
95.99 | ISO/TC 61 |
Plastics — Polyvinyl chloride pastes — Determination of apparent viscosity using the Severs rheometer
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(vinyl chloride) pastes — Determination of apparent viscosity using the Severs rheometer
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Aqueous dispersions of homopolymers and copolymers — Determination of gross particle content by sieve analysis
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polypropylene and propylene-copolymers — Determination of thermal oxidative stability in air — Oven method
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polypropylene and propylene-copolymers — Determination of thermal oxidative stability in air — Oven method
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
|
90.93 | ISO/TC 61/SC 9 |
Plastics — PVC resins for general use — Determination of plasticizer absorption at room temperature
|
95.99 | ISO/TC 61 |
Plastics — Homopolymer and copolymer resins of vinyl chloride for general use — Determination of plasticizer absorption at room temperature
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Homopolymer and copolymer resins of vinyl chloride for general use — Determination of plasticizer absorption at room temperature
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Homopolymer and copolymer resins of vinyl chloride for general use — Determination of plasticizer absorption at room temperature
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Vinyl chloride homopolymer and copolymer resins — Sieve analysis using air-jet sieve apparatus
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Vinyl chloride homopolymer and copolymer resins — Sieve analysis using air-jet sieve apparatus
|
90.93 | ISO/TC 61/SC 9 |
Plastics — PVC paste resins — Preparation of a paste
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Preparation of PVC pastes for test purposes — Planetary-mixer method
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Preparation of PVC pastes for test purposes — Planetary-mixer method
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Ethylene/vinyl acetate copolymer thermoplastics (E/VAC) — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials — Part 1: Designation and specification
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Ethylene/vinyl acetate copolymer (E/VAC) thermoplastics — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amendment 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of the thermal stability of polyvinyl chloride (PVC) — Conductometric method
|
95.99 | ISO/TC 61 |
Plastics — Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials — Part 1: Designation
|
95.99 | ISO/TC 61 |
Plastics — Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Styrene/acrylonitrile (SAN) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials — Part 2: Determination of properties
|
95.99 | ISO/TC 61 |
Plastics — Styrene/acrylonitrile (SAN) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Joining of thermoplastic moulded components — Specification for quality levels for imperfections
|
60.60 | ISO/TC 61/SC 11 |
Plastics — Determination of pourability
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of pourability
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Poly(ethylene terephthalate) granules — Determination of water content
|
95.99 | ISO/TC 61 |
Plastics — Poly(alkylene terephthalate) granules — Determination of water content
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of residual vinyl chloride monomer — Gas chromatographic method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Poly(vinyl chloride) — Determination of residual vinyl chloride monomer — Gas-chromatographic method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Poly(vinyl chloride) — Determination of residual vinyl chloride monomer using gas-chromatographic method
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Impact-resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Thermoplastics for plain bearings — Classification and designation
|
95.99 | ISO/TC 123/SC 2 |
Thermoplastic polymers for plain bearings — Classification and designation
|
95.99 | ISO/TC 123/SC 2 |
Thermoplastic polymers for plain bearings — Classification and designation
|
60.60 | ISO/TC 123/SC 2 |
Plastics — Polycarbonate moulding and extrusion materials — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polycarbonate moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyalkylene terephthalates — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(alkylene terephthalate) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyalkylene terephthalates — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Amorphous thermoplastic moulding materials — Determination of maximum reversion
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Ethylene/vinyl acetate copolymer (E/VAC) thermoplastics — Determination of vinyl acetate content
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Ethylene/vinyl acetate copolymer (EVAC) thermoplastics — Determination of vinyl acetate content
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Ethylene/vinyl acetate copolymer (EVAC) thermoplastics — Determination of vinyl acetate content
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Polybutene (PB) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polybutene (PB) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polybutene (PB) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amendment 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Determination of isotactic index
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Determination of isotactic index
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 1: Designation
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials — Amendment 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
|
90.92 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
|
40.20 | ISO/TC 61/SC 2 |
Plastics — Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Methyl methacrylate/ acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamides — Determination of ε-caprolactam and ω-laurolactam by gas chromatography
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Preparation of PVC pastes for test purposes — Dissolver method
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications — Amendment 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods
|
95.99 | ISO/TC 61/SC 9 |
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates — Part 1: Designation system and basis for specifications
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates — Part 2: Preparation of test specimens and determination of properties
|
90.60 | ISO/TC 61/SC 9 |
Binders for paints and varnishes — Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions
|
90.93 | ISO/TC 35 |
Plastics — Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 1: Designation system and basis for specification
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 1: Designation system and basis for specifications
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 2: Determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 2: Determination of properties
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polymer dispersions — Determination of free formaldehyde
|
90.92 | ISO/TC 61/SC 9 |
Plastics — Polymer dispersions — Determination of free formaldehyde
|
50.00 | ISO/TC 61/SC 9 |
Plastics — Polyketone (PK) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyketone (PK) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Thermoplastics materials — Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
|
90.93 | ISO/TC 138/SC 5 |
Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for specifications
|
90.92 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for specifications
|
40.99 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 3: Distinction between ether and ester polyurethanes by determination of the ester group content
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Determination of environmental stress cracking (ESC) of polyethylene — Full-notch creep test (FNCT)
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of environmental stress cracking (ESC) of polyethylene — Full-notch creep test (FNCT)
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Determination of drawing characteristics of thermoplastics in the molten state
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of drawing characteristics of thermoplastics in the molten state
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Polyethylene (PE) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
90.92 | ISO/TC 61/SC 9 |
Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
50.20 | ISO/TC 61/SC 9 |
Thermoplastic elastomers — Nomenclature and abbreviated terms
|
95.99 | ISO/TC 45 |
Thermoplastic elastomers — Nomenclature and abbreviated terms
|
95.99 | ISO/TC 45 |
Thermoplastic elastomers — Nomenclature and abbreviated terms
|
60.60 | ISO/TC 45 |
Plastics — Test method for estimation of the short chain branching distribution of semicrystalline ethylene 1-olefin copolymers by differential scanning calorimetry (DSC)
|
40.99 | ISO/TC 61/SC 9 |
Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging — Part 1: Designation system and basis for specification
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging — Part 2: Preparation of test specimens and determination of properties
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Styrene/acrylonitrile (SAN) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Styrene-acrylonitrile (SAN) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
90.92 | ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
50.00 | ISO/TC 61/SC 9 |
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling
|
90.93 | ISO/TC 138/SC 5 |
Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specification
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
90.93 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 1: Designation system and basis for specification
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Ethylene-vinyl acetate (EVAC) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Ethylene-vinyl acetate (EVAC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specification
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Polyketone (PK) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyketone (PK) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Polyketone (PK) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyketone (PK) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Vinyl chloride homopolymer and copolymer resins — Particle size determination by mechanical sieving
|
90.20 | ISO/TC 61/SC 9 |
Plastics — Polyetheretherketone (PEEK) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Polyetheretherketone (PEEK) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Joining of thermoplastic moulded components — Specification of variables for thermal joining processes
|
60.60 | ISO/TC 61/SC 11 |
Plastics — Polystyrene (PS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Polystyrene (PS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 1: Designation system and basis for specifications
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Preparation of test samples and determination of properties
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Sulfone polymer moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Sulfone polymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Polyethylene (PE) and polypropylene (PP) thermoplastics — Determination of metal content by ICP-OES
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) by Dumas combustion method
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Polypropylene (PP) — Determination of isotactic index by low-resolution nuclear magnetic resonance spectrometry
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Sulfone polymer moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Sulfone polymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Preparation of test specimens of thermoplastic materials using mouldless technologies — Part 1: General principles, and laser sintering of test specimens
|
95.99 | ISO/TC 261 |
Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 1: Designation system and basis for specifications
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
|
90.93 | ISO/TC 61/SC 9 |
No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.