Mechanical vibration and shock — Resilient mounting systems — Part 1: Technical information to be exchanged for the application of isolation systems

Mechanical vibration and shock — Resilient mounting systems — Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems

Mechanical vibration and shock — Resilient mounting systems — Part 3: Technical information to be exchanged for application of vibration isolation to new buildings

Vibration and shock — Isolators — Procedure for specifying characteristics

Vibration and shock — Vocabulary

Vibration and shock — Vocabulary

Mechanical vibration, shock and condition monitoring — Vocabulary

Mechanical vibration, shock and condition monitoring — Vocabulary

Mechanical vibration of machines with operating speeds from 10 to 200 rev/s — Basis for specifying evaluation standards

Mechanical vibration of machines with operating speeds from 10 to 200 rev/s — Basis for specifying evaluation standards — Amendment 1

Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm — Measurement and evaluation of the vibration severity

Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity

Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity

Reciprocating internal combustion engines — Performance — Part 5: Torsional vibrations

Reciprocating internal combustion engines — Performance — Part 5: Torsional vibrations

Ships and marine technology — Technical guidelines for active source exploration with ocean bottom seismometers (OBS)

Mechanical vibration of large rotating machines with speed range from 10 to 200 rev/s — Measurement and evaluation of vibration severity in situ

Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s — Measurement and evaluation of vibration severity in situ

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 7: Vibration fatigue test

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 7: Vibration fatigue test

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration fatigue test for composite filter housings

Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings

Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings — Amendment 1

Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings — Amendment 2

Mechanical vibration and shock — Vibration of fixed structures — Guidelines for the measurement of vibrations and evaluation of their effects on structures

Code for the measurement and reporting of shipboard vibration data

Code for the measurement and reporting of local vibration data of ship structures and equipment

Civil small and light unmanned aircraft systems (UAS) — Vibration test methods

Electrodynamic test equipment for generating vibration — Methods of describing equipment characteristics

Electrodynamic vibration generating systems — Performance characteristics

Electrodynamic vibration generating systems — Performance characteristics — Amendment 1

Methods for the calibration of vibration and shock pick-ups — Part 0: Basic concepts

Methods for the calibration of vibration and shock pick-ups — Part 0: Basic concepts — Technical Corrigendum 1

Methods for the calibration of vibration and shock pick-ups — Part 0: Basic concepts — Technical Corrigendum 2

Methods for the calibration of vibration and shock pick-ups — Part 1: Primary vibration calibration by laser interferometry

Methods for the calibration of vibration and shock pick-ups — Part 2: Primary shock calibration by light cutting

Methods for the calibration of vibration and shock pick-ups — Part 3: Secondary vibration calibration

Methods for the calibration of vibration and shock pick-ups — Part 4: Secondary shock calibration

Methods for the calibration of vibration and shock pick-ups — Part 5: Calibration by Earth's gravitation

Methods for the calibration of vibration and shock pick-ups — Part 6: Primary vibration calibration at low frequencies

Methods for the calibration of vibration and shock pick-ups — Part 7: Primary calibration by centrifuge

Methods for the calibration of vibration and shock pick-ups — Part 8: Primary calibration by dual centrifuge

Methods for the calibration of vibration and shock pick-ups — Part 9: Secondary vibration calibration by comparison of phase angles

Methods for the calibration of vibration and shock pick-ups — Part 10: Primary calibration by high impact shocks

Methods for the calibration of vibration and shock pick-ups — Part 11: Testing of transverse vibration sensitivity

Methods for the calibration of vibration and shock pick-ups — Part 12: Testing of transverse shock sensitivity

Methods for the calibration of vibration and shock pick-ups — Part 13: Testing of base strain sensitivity

Methods for the calibration of vibration and shock pick-ups — Part 14: Resonance frequency testing of undamped accelerometers on a steel block

Methods for the calibration of vibration and shock pick-ups — Part 15: Testing of acoustic sensitivity

Methods for the calibration of vibration and shock pick-ups — Part 16: Testing of mounting torque sensitivity

Methods for the calibration of vibration and shock pick-ups — Part 17: Testing of fixed temperature sensitivity

Methods for the calibration of vibration and shock pick-ups — Part 18: Testing of transient temperature sensitivity

Methods for the calibration of vibration and shock pick-ups — Part 19: Testing of magnetic field sensitivity

Methods for the calibration of vibration and shock pick-ups — Part 20: Primary vibration calibration by the reciprocity method

Methods for the calibration of vibration and shock pick-ups — Part 22: Accelerometer resonance testing — General methods

Mechanical vibration and shock — Mechanical mounting of accelerometers

Mechanical vibration and shock — Mechanical mounting of accelerometers

Mechanical vibration and shock — Mechanical mounting of accelerometers

Auxiliary tables for vibration generators — Methods of describing equipment characteristics

Auxiliary tables for vibration generators — Methods of describing equipment characteristics — Technical Corrigendum 1

Auxiliary tables for vibration generators — Methods of describing equipment characteristics

Mechanical vibration and shock — Guidelines for the overall evaluation of vibration in merchant ships

Mechanical vibration — Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships

Vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic definitions and transducers

Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications

Vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter

Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter

Vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure

Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure

Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation — Part 1: General guidelines

Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 1: General guidelines

Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 2: Large land-based steam turbine generator sets

Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min

Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min

Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 3: Coupled industrial machines

Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 3: Coupled industrial machines — Technical Corrigendum 1

Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines

Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines — Amendment 1

Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 4: Gas turbine sets

Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 4: Gas turbine sets with fluid-film bearings

Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 4: Gas turbine sets with fluid-film bearings — Amendment 1

Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 5: Machine sets in hydraulic power generating and pumping plants

Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 5: Machine sets in hydraulic power generating and pumping plants

Mechanical vibrations — Land vehicles — Method for reporting measured data

Shock and vibration measurements — Characteristics to be specified for seismic pick-ups

Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations

Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations

Mechanical shock — Testing machines — Characteristics and performance

Mechanical shock — Testing machines — Characteristics and performance

Mechanical vibration — Shock-and-vibration-sensitive electronic equipment — Methods of measurement and reporting data of shock and vibration effects in buildings

Mechanical vibration and shock — Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings

Acceptance code for gears — Part 2: Determination of mechanical vibrations of gear units during acceptance testing

Mechanical vibration — Road surface profiles — Reporting of measured data

Mechanical vibration — Road surface profiles — Reporting of measured data

Servo-hydraulic test equipment for generating vibration — Method of describing characteristics

Servo-hydraulic test equipment for generating vibration — Method of describing characteristics — Amendment 1

Mechanical vibration and shock — Analytical methods of assessing shock resistance of mechanical systems — Information exchange between suppliers and users of analyses

Mechanical vibration — Vibration testing requirements for shipboard equipment and machinery components

Damping materials — Graphical presentation of the complex modulus

Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 1: Measurement and evaluation

Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 2: Classification

Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing

Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing — Technical Corrigendum 1

Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing

Vibration-generating machines — Guidance for selection — Part 2: Equipment for dynamic structural testing

Vibration generating machines — Guidance for selection — Part 4: Equipment for multi-axial environmental testing

Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains

Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines — Amendment 1

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Large land-based steam turbine generator sets in excess of 50 MW

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min — Technical Corrigendum 1

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ — Amendment 1

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine driven sets excluding aircraft derivatives

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings — Amendment 1

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 5: Machine sets in hydraulic power generating and pumping plants

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW — Amendment 1

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 8: Reciprocating compressor systems

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 21: Horizontal axis wind turbines with gearbox

Rotating shaft vibration measuring systems — Part 1: Relative and absolute sensing of radial vibration

Condition monitoring and diagnostics of machines — Vocabulary

Condition monitoring and diagnostics of machines — Vocabulary

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 3: Guidelines for vibration diagnosis

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 4: Diagnostic techniques for gas and steam turbines with fluid-film bearings

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 5: Diagnostic techniques for fans and blowers

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 10: Diagnostic techniques for electrical generators with fluid film bearings

Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 1: General guidelines

Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 2: Data processing

Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 3: Communication

Condition monitoring and diagnostics of machine systems — Data processing, communication and presentation — Part 4: Presentation

Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 1: General guidelines

Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 1: General guidelines

Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 2: Data-driven applications

Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 2: Data-driven applications

Condition monitoring and diagnostics of machines — General guidelines on data interpretation and diagnostics techniques

Condition monitoring and diagnostics of machines — General guidelines on using performance parameters

Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines

Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines

Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines

Industrial fans — Method of measurement of fan vibration

Industrial fans — Method of measurement of fan vibration — Technical Corrigendum 1

Condition monitoring and diagnostics of machine systems — Tribology-based monitoring and diagnostics — Part 1: General requirements and guidelines

Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 1: General guidance

Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 31: Guideline on field measurements for the evaluation of human exposure in buildings

Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic properties of the ground

Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 34: Characterizing irregularity of the running surfaces with respect to vibration excitation

Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary

Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary — Amendment 1

Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary

Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 2: Evaluation of vibration

Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 3: Evaluation of stability margin

Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 4: Technical guidelines

Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 5: Touch-down bearings

Mechanical vibration and shock — Guidelines for dynamic tests and investigations on bridges and viaducts

Mechanical vibration and shock — Vibration of stationary structures — Specific requirements for quality management in measurement and evaluation of vibration

Mechanical vibration and shock — Coupling forces at the man—machine interface for hand-transmitted vibration

Vibration and shock generating systems — Vocabulary

Vibration and shock generating systems — Vocabulary — Amendment 1

Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts

Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts — Amendment 1

Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts — Amendment 2

Methods for the calibration of vibration and shock transducers — Part 11: Primary vibration calibration by laser interferometry

Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method

Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method — Technical Corrigendum 1

Methods for the calibration of vibration and shock transducers — Part 13: Primary shock calibration using laser interferometry

Methods for the calibration of vibration and shock transducers — Part 15: Primary angular vibration calibration by laser interferometry

Methods for the calibration of vibration and shock transducers — Part 16: Calibration by Earth's gravitation

Methods for the calibration of vibration and shock transducers — Part 17: Primary calibration by centrifuge

Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer

Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Amendment 1

Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Technical Corrigendum 1

Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Amendment 2

Methods for the calibration of vibration and shock transducers — Part 22: Shock calibration by comparison to a reference transducer

Methods for the calibration of vibration and shock transducers — Part 22: Shock calibration by comparison to a reference transducer — Amendment 1

Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity

Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity — Amendment 1

Methods for the calibration of vibration and shock transducers — Part 32: Resonance testing — Testing the frequency and the phase response of accelerometers by means of shock excitation

Methods for the calibration of vibration and shock transducers — Part 33: Testing of magnetic field sensitivity

Methods for the calibration of vibration and shock transducers — Part 34: Testing of sensitivity at fixed temperatures

Methods for the calibration of vibration and shock transducers — Part 41: Calibration of laser vibrometers

Methods for the calibration of vibration and shock transducers — Part 42: Calibration of seismometers with high accuracy using acceleration of gravity

Methods for the calibration of vibration and shock transducers — Part 43: Calibration of accelerometers by model-based parameter identification

Methods for the calibration of vibration and shock transducers — Part 44: Calibration of field vibration calibrators

Methods for the calibration of vibration and shock transducers — Part 45: In-situ calibration of transducers with built in calibration coil

Mechanical vibration and shock — Performance parameters for condition monitoring of structures

Condition monitoring and diagnostics of machines — General guidelines

Condition monitoring and diagnostics of machines — General guidelines

Condition monitoring and diagnostics of machines — General guidelines

Condition monitoring and diagnostics of machines — Approaches for performance diagnosis

Mechanical vibration and shock — Measurement of vibration power flow from machines into connected support structures — Part 1: Direct method

Mechanical vibration and shock — Measurement of vibration power flow from machines into connected support structures — Part 2: Indirect method

Mechanical vibration and shock — Signal processing — Part 1: General introduction

Mechanical vibration and shock — Signal processing — Part 1: General introduction — Technical Corrigendum 1

Mechanical vibration and shock — Signal processing — Part 2: Time domain windows for Fourier Transform analysis

Mechanical vibration and shock — Signal processing — Part 2: Time domain windows for Fourier Transform analysis — Technical Corrigendum 1

Mechanical vibration and shock — Signal processing — Part 3: Methods of time-frequency analysis

Mechanical vibration and shock — Signal processing — Part 4: Shock-response spectrum analysis

Condition monitoring and diagnostics of machines — Thermography — Part 1: General procedures

Condition monitoring and diagnostics of machine systems — Thermography — Part 2: Image interpretation and diagnostics

Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 1: Requirements for certifying bodies and the certification process

Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 1: Requirements for certifying bodies and the certification process — Technical Corrigendum 1

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 1: Requirements for assessment bodies and the assessment process

Condition monitoring and diagnostics of machine systems — Requirements for certification of personnel — Part 1: Sector specific requirements for certification bodies and the certification process

Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel — Part 2: Vibration condition monitoring and diagnostics

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 2: Vibration condition monitoring and diagnostics

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process — Amendment 1

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 4: Field lubricant analysis

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 4: Field lubricant analysis

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 6: Acoustic emission

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 6: Acoustic emission

Condition monitoring and diagnostics of machines — Requirements for certification of personnel — Part 6: Acoustic emission

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 7: Thermography

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 7: Thermography

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 8: Ultrasound

Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines

Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method

Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method — Amendment 1

Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method

Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method — Amendment 1

Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method

Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element analysis

Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 6: Time-temperature superposition

Mechanical vibration — Evaluation of measurement results from dynamic tests and investigations on bridges

Mechanical vibration — Methodology for selecting appropriate machinery vibration standards

Condition monitoring and diagnostics of machines — Hydroelectric generating units

Human response to vibration — Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety

Mechanical vibration — Measurement of vibration on ships — Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships

Mechanical vibration — Measurement and evaluation of machine vibration — Part 1: General guidelines

Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min

Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min — Amendment 1

Mechanical vibration — Measurement and evaluation of machine vibration — Part 3: Industrial machinery with a power rating above 15 kW and operating speeds between 120 r/min and 30 000 r/min

Mechanical vibration — Measurement and evaluation of machine vibration — Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings

Mechanical vibration — Measurement and evaluation of machine vibration — Part 5: Machine sets in hydraulic power generating and pump-storage plants

Mechanical vibration — Measurement and evaluation of machine vibration — Part 8: Reciprocating compressor systems

Mechanical vibration — Measurement and evaluation of machine vibration — Part 9: Gear units

Mechanical vibration — Measurement and evaluation of machine vibration — Part 21: Horizontal axis wind turbines

Condition monitoring and diagnostics of machine systems — Electrical signature analysis of three-phase induction motors

Mechanical vibration and shock — Parameters to be specified for the acquisition of vibration data

Ships and marine technology — Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships

Condition monitoring and diagnostics of machines — Acoustic emission

Mechanical vibration — Torsional vibration of rotating machinery — Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW

Mechanical vibration — Torsional vibration of rotating machinery — Part 1: Evaluation of steam and gas turbine generator sets due to electrical excitation

Space systems — Vibration testing

Condition monitoring and diagnostics of machines — Ultrasound — Part 1: General guidelines

Condition monitoring and diagnostics of machines — Ultrasound — Part 2: Procedures and validation

Condition monitoring and diagnostics of machines — Ultrasound — General guidelines, procedures and validation

Condition monitoring and diagnostics of machines — Ultrasound — General guidelines, procedures and validation

Smart community infrastructures — Disaster risk reduction — Guidance for implementing seismometer systems