Фильтр :
Стандарт и/или проект Этап ТК
Withdrawal of ISO/R 598-1967
95.99 ISO/TC 44
Methods for determining the mechanical properties of the weld metal deposited by electrodes 3,15 mm or more in diameter
95.99 ISO/TC 44
Calculation of rectangular symmetrical fillet welds statically loaded in such a way that the transverse section is not under any normal stress
95.99 ISO/TC 44
Withdrawal of ISO/R 626-1967
95.99 ISO/TC 44
Withdrawal of ISO/R 627-1967
95.99 ISO/TC 44
Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness
95.99 ISO/TC 44
Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness — Addendum 1
95.99 ISO/TC 44
Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick
95.99 ISO/TC 44/SC 5
Recommended practice for radiographic examination of fusion welded joints — Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
95.99 ISO/TC 44/SC 5
Recommended practice for radiographic examination of fusion welded joints — Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness
95.99 ISO/TC 44/SC 5
Recommended practice for radiographic inspection of fusion welded butt joints for steel plates up to 50 mm (2 in) thick
95.99 ISO/TC 44
Welds in steel — Reference block for the calibration of equipment for ultrasonic examination
95.99 ISO/TC 135/SC 3
Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
90.93 ISO/TC 135/SC 3
Recommended practice for radiographic inspection of fusion welded butt joints for steel plates 50 to 200 mm thick
95.99 ISO/TC 44
Recommended practice for the X-ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick
95.99 ISO/TC 44/SC 5
Radiography of welds and viewing conditions for films — Utilization of recommended patterns of image quality indicators (I.Q.I.)
95.99 ISO/TC 44/SC 5
Welds — Symbolic representation on drawings
95.99 ISO/TC 44
Welds — Symbolic representation on drawings
95.99 ISO/TC 44/SC 7
Welded, brazed and soldered joints — Symbolic representation on drawings
95.99 ISO/TC 44/SC 7
Welding and allied processes — Symbolic representation on drawings — Welded joints
95.99 ISO/TC 44/SC 7
Welding and allied processes — Symbolic representation on drawings — Welded joints
60.60 ISO/TC 44/SC 7
Welding requirements — Categories of service requirements for welded joints
95.99 ISO/TC 44/SC 10
Welding requirements — Factors to be considered in specifying requirements for fusion welded joints in steel (technical influencing factors)
95.99 ISO/TC 44/SC 10
Welding — Determination of hydrogen in deposited weld metal arising from the use of covered electrodes for welding mild and low alloy steels
95.99 ISO/TC 44/SC 3
Welding — Determination of hydrogen in deposited weld metal arising from the use of covered electrodes for welding mild and low alloy steels — Addendum 1
95.99 ISO/TC 44/SC 3
Welding — Determination of hydrogen in deposited weld metal arising from the use of covered electrodes for welding mild and low alloy steels — Addendum 2: Recommended methods of reporting single bead weld metal hydrogen contents
95.99 ISO/TC 44/SC 3
Welding and allied processes — Determination of hydrogen content in ferritic steel arc weld metal
95.99 IIW
Welding and allied processes — Determination of hydrogen content in arc weld metal
95.99 IIW
Welding and allied processes — Determination of hydrogen content in arc weld metal
60.60 IIW
Radiographic inspection of resistance spot welds for aluminium and its alloys — Recommended practice
95.99 ISO/TC 44/SC 6
Welded joints — Recommended practice for liquid penetrant testing
95.99 ISO/TC 44
Fusion-welded butt joints in steel — Transverse tensile test
95.99 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Transverse tensile test
95.99 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Transverse tensile test
95.99 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Transverse tensile test
60.60 ISO/TC 44/SC 5
Non-destructive testing of welds — Phased array ultrasonic testing (UT-PA) for thin-walled steel components — Acceptance levels
60.60 ISO/TC 44/SC 5
Fusion welded butt joints in steel — Transverse root and face bend test
95.99 ISO/TC 44
Destructive tests on welds in metallic materials — Bend tests
95.99 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Bend tests
90.92 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Bend tests — Amendment 1
60.60 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Bend tests
50.00 ISO/TC 44/SC 5
Fusion welded butt joints in steel — Transverse side bend test
95.99 ISO/TC 44
Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints
95.99 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints
60.60 ISO/TC 44/SC 5
Arc-welded joints in steel — Guidance on quality levels for imperfections
95.99 ISO/TC 44/SC 10
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
95.99 ISO/TC 44/SC 10
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections — Technical Corrigendum 1
95.99 ISO/TC 44/SC 10
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
90.92 ISO/TC 44/SC 10
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
50.00 ISO/TC 44/SC 10
Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding
95.99 ISO/TC 44/SC 7
Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding
90.93 ISO/TC 44/SC 7
Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure
95.99 ISO/TC 44/SC 7
Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure
90.93 ISO/TC 44/SC 7
Classification of imperfections in metallic fusion welds, with explanations
95.99 ISO/TC 44/SC 7
Fundamental welding positions — Definitions and values of angles of slope and rotation for straight welds for these positions
95.99 ISO/TC 44
Welds — Working positions — Definitions of angles of slope and rotation
95.99 ISO/TC 44/SC 7
Welding and allied processes — Welding positions
95.99 ISO/TC 44/SC 7
Welding and allied processes — Welding positions
60.60 ISO/TC 44/SC 7
Welds in steel — Calibration block No. 2 for ultrasonic examination of welds
95.99 ISO/TC 44/SC 5
Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2
90.92 ISO/TC 135/SC 3
Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
60.00 ISO/TC 135/SC 3
Welding — Determination of ferrite number in austenitic weld metal deposited by covered Cr-Ni steel electrodes
95.99 ISO/TC 44/SC 3
Welding — Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
95.99 IIW
Welding — Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
60.60 IIW
Destructive tests on welds in metallic materials — Hardness testing — Part 1: Hardness test on arc welded joints
90.93 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
95.99 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
90.93 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination
95.99 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination
95.99 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination
60.60 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Fracture test
95.99 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Fracture test
60.60 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints
95.99 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints
90.93 ISO/TC 44/SC 5
Welding and allied processes — Recommendations for joint preparation — Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels
95.99 ISO/TC 44/SC 7
Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
90.93 ISO/TC 44/SC 7
Welding and allied processes — Recommendations for joint preparation — Part 4: Clad steels
90.93 ISO/TC 44/SC 7
Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding — Joint preparations for steel
95.99 ISO/TC 44/SC 7
Electric resistance and induction welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for the detection of longitudinal imperfections
95.99 ISO/TC 17/SC 19
Submerged arc-welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
95.99 ISO/TC 17/SC 19
Arc-welded joints in aluminium and its weldable alloys — Guidance on quality levels for imperfections
95.99 ISO/TC 44/SC 10
Welding — Arc-welded joints in aluminium and its alloys — Quality levels for imperfections
95.99 ISO/TC 44/SC 10
Welding — Arc-welded joints in aluminium and its alloys — Quality levels for imperfections — Technical Corrigendum 1
95.99 ISO/TC 44/SC 10
Welding — Arc-welded joints in aluminium and its alloys — Quality levels for imperfections
60.60 ISO/TC 44/SC 10
Welding — Peel and chisel testing of resistance spot, projection and seam welds
95.99 IIW
Resistance welding — Peel and chisel testing of resistance spot and projection welds
95.99 IIW
Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds
90.92 ISO/TC 44/SC 6
Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds
50.20 ISO/TC 44/SC 6
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
60.60 ISO/TC 44/SC 5
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
60.60 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
60.60 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Acceptance levels
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Acceptance levels
60.60 ISO/TC 44/SC 5
Submerged arc-welded steel tubes for pressure purposes — Radiographic testing of the weld seam for the detection of imperfections
95.99 ISO/TC 17/SC 19
Welding — Laser-arc hybrid welding of steels, nickel and nickel alloys — Quality levels for imperfections
90.93 ISO/TC 44/SC 10
Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for tensile shear testing of single joints
90.93 ISO/TC 44/SC 6
Mechanical joining — Guidelines for fatigue testing of joints
60.60 ISO/TC 44/SC 6
Mechanical joining — Form-fit blind rivets and (lock) bolt joints — Specifications and qualification of testing procedures
90.93 ISO/TC 44/SC 6
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
60.60 ISO/TC 44/SC 5
Welded steel tubes for pressure purposes — Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
95.99 ISO/TC 17/SC 19
Welding — Electron and laser-beam welded joints — Guidance on quality levels for imperfections — Part 1: Steel
95.99 ISO/TC 44/SC 10
Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 1: Steel, nickel, titanium and their alloys
60.60 ISO/TC 44/SC 10
Welding — Electron and laser beam welded joints — Guidance on quality levels for imperfections — Part 2: Aluminium and its weldable alloys
95.99 ISO/TC 44/SC 10
Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 2: Aluminium, magnesium and their alloys and pure copper
60.60 ISO/TC 44/SC 10
Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
95.99 IIW
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
90.93 ISO/TC 44/SC 6
Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)
95.99 IIW
Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
95.99 IIW
Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds — Technical Corrigendum 1
95.99 IIW
Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
90.20 ISO/TC 44/SC 6
Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
95.99 IIW
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
90.93 ISO/TC 44/SC 6
Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
95.99 IIW
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
90.93 ISO/TC 44/SC 6
Resistance spot welding and projection welds — Destructive testing of welds — Specimen dimensions and procedure for impact shear test and cross-tension testing
95.99 IIW
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
90.93 ISO/TC 44/SC 6
Resistance spot welding — Destructive tests of welds — Method for the fatigue testing of spot welded joints
90.93 ISO/TC 44/SC 6
Resistance welding — Destructive tests of welds — Failure types and geometric measurements for resistance spot, seam and projection welds
95.99 ISO/TC 44/SC 6
Fatigue — Fatigue testing of welded components — Guidance
60.60 IIW
Static design procedure for welded hollow-section joints — Recommendations
90.93 IIW
Fatigue — Design procedure for welded hollow-section joints — Recommendations
90.93 IIW
Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels
60.60 ISO/TC 44/SC 5
Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
95.99 ISO/TC 164/SC 4
Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
60.60 ISO/TC 164/SC 4
Destructive tests on welds in metallic materials — Etchants for macroscopic and microscopic examination
90.93 ISO/TC 44/SC 5
Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for cross-tension testing of single joints
90.93 ISO/TC 44/SC 6
Non-destructive testing of welds — General rules for fusion welds in metallic materials
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — General rules for metallic materials
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — General rules for metallic materials
90.92 ISO/TC 44/SC 5
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
60.60 ISO/TC 44/SC 5
Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
60.60 ISO/TC 44/SC 5
Non-destructive testing of welds — Radiographic testing of fusion-welded joints
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Visual testing of fusion-welded joints
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Visual testing of fusion-welded joints
90.93 ISO/TC 44/SC 5
Non-destructive testing of welds — Magnetic particle testing
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Magnetic particle testing
90.93 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds
95.99 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds
60.60 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing of welded joints
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
60.60 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 1: General
90.93 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
95.99 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
90.93 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests
90.93 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 1: General
90.93 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
90.93 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests
90.93 ISO/TC 44/SC 5
Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
90.93 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Torsion test of resistance spot welds
95.99 ISO/TC 44/SC 6
Resistance welding — Destructive tests on welds in metallic materials — Torsion test of resistance spot welds
90.20 ISO/TC 44/SC 6
Destructive tests on welds in metallic materials — Resistance welding — Pressure test on resistance seam welds
95.99 ISO/TC 44/SC 6
Resistance welding — Destructive tests of welds — Pressure test of resistance seam welds
90.93 ISO/TC 44/SC 6
Destructive tests on welds in metallic materials — Method for taking samples for delta ferrite measurement
95.99 ISO/TC 44/SC 3
Welding — Multilingual terms for welded joints with illustrations
90.93 ISO/TC 44/SC 7
Welding and allied processes — Designation system for imperfections
95.99 ISO/TC 44/SC 7
Resistance welding — Weldability — Part 2: Alternative procedures for the assessment of sheet steels for spot welding
95.99 ISO/TC 44/SC 6
Resistance welding — Weldability — Part 2: Evaluation procedures for weldability in spot welding
90.93 ISO/TC 44/SC 6
Resistance welding — Weldability — Part 3: Evaluation procedures for weldability in spot weld bonding
90.20 ISO/TC 44/SC 6
Resistance welding — Destructive testing of welds — Method for the fatigue testing of multi-spot-welded specimens
95.99 ISO/TC 44/SC 6
Resistance welding — Destructive testing of welds — Method for the fatigue testing of multi-spot-welded specimens
60.60 ISO/TC 44/SC 6
Friction stir spot welding — Aluminium — Part 1: Vocabulary
60.60 IIW
Friction stir spot welding — Aluminium — Part 2: Design of weld joints
60.60 IIW
Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels
90.20 ISO/TC 44/SC 5
Guidelines on weld quality in relationship to fatigue strength
90.93 IIW
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
60.60 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
90.20 ISO/TC 44/SC 5
Destructive tests on welds in metallic materials — Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
90.93 ISO/TC 44/SC 5
Non-destructive testing of welds — Penetrant testing of welds — Acceptance levels
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Penetrant testing — Acceptance levels
90.93 ISO/TC 44/SC 5
Non-destructive testing of welds — Magnetic particle testing of welds — Acceptance levels
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Magnetic particle testing — Acceptance levels
90.93 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Characterization of indications in welds
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Characterization of indications in welds
95.99 ISO/TC 44/SC 5
Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
90.20 ISO/TC 44/SC 5
Mechanical joining of sheet materials — Destructive testing of joints — Specimen dimensions and procedure for mechanized peel testing of single joints
60.60 ISO/TC 44/SC 6
Non‐destructive testing of welds — Ultrasonic testing — Use of automated total focusing technique (TFM) and related technologies
60.60 IIW
Non-destructive testing — Metal magnetic memory — Part 1: Vocabulary
95.99 IIW
Non-destructive testing — Metal magnetic memory — Part 1: Vocabulary and general requirements
60.60 IIW
Non-destructive testing — Metal magnetic memory — Part 2: General requirements
95.99 IIW
Non-destructive testing — Metal magnetic memory — Part 2: Inspection of welded joints
60.60 IIW
Non-destructive testing — Metal magnetic memory — Part 3: Inspection of welded joints
95.99 IIW
Friction stir welding — Aluminium — Part 2: Design of weld joints
95.99 IIW
Friction stir welding — Aluminium — Part 2: Design of weld joints
60.60 IIW

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.