Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Shipbuilding details — Marking of rolled, drawn and extruded products in light metals or in light alloys
|
95.99 | ISO/TC 79 |
Wrought aluminium and aluminium alloys — Chemical composition and forms of products — Part 1: Chemical composition
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Chemical composition and forms of products — Part 2: Forms of products
|
95.99 | ISO/TC 79/SC 6 |
Aluminium and aluminium alloys — Chemical composition
|
90.92 | ISO/TC 79/SC 6 |
Composition of wrought products of aluminium and aluminium alloys — Chemical composition (per cent)
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Chemical composition
|
50.20 | ISO/TC 79/SC 6 |
Mechanical property limits for rolled products of aluminium and aluminium alloys
|
95.99 | ISO/TC 79/SC 6 |
Mechanical property limits for extruded products of aluminium and aluminium alloys
|
95.99 | ISO/TC 79/SC 6 |
Mechanical property limits for extruded products of aluminium and aluminium alloys — Addendum 1
|
95.99 | ISO/TC 79 |
Mechanical property limits for rivet stock of aluminium and aluminium alloys
|
95.99 | ISO/TC 79/SC 6 |
Mechanical property limits for aluminium alloy forgings
|
95.99 | ISO/TC 79/SC 6 |
Flattening test on aluminium and aluminium alloy tubes
|
95.99 | ISO/TC 164/SC 2 |
Simple torsion test for aluminium and aluminium alloy wire
|
95.99 | ISO/TC 164/SC 2 |
Wrapping test for aluminium and aluminium alloy wire
|
95.99 | ISO/TC 164/SC 2 |
Wrought aluminium and aluminium alloys — Rolled products — Mechanical properties
|
95.99 | ISO/TC 79/SC 6 |
Aluminium alloy chill castings — Reference test bar
|
95.99 | ISO/TC 79/SC 7 |
Aluminium alloy sand castings — Reference test bar
|
95.99 | ISO/TC 79/SC 7 |
Extruded solid profiles in aluminium-zinc- magnesium alloy Al Zn4,5 Mg1 (7020) — Chemical composition and mechanical properties
|
95.99 | ISO/TC 79/SC 6 |
Cast aluminium alloys — Chemical composition of cast aluminium alloys and mechanical properties of sand cast aluminium alloys
|
95.99 | ISO/TC 79 |
Aluminium and aluminium alloys — Castings — Chemical composition and mechanical properties
|
95.99 | ISO/TC 79/SC 7 |
Aluminium and aluminium alloys — Castings — Chemical composition and mechanical properties
|
90.20 | ISO/TC 79/SC 7 |
Wrought aluminium and aluminium alloy products — General conditions for inspection and delivery
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Drawn round bars — Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter)
|
95.99 | ISO/TC 79/SC 6 |
Materials and equipment for petroleum and natural gas industries — Aluminium alloy drill pipe for oil or natural gas wells
|
95.99 | ISO/TC 67/SC 7 |
Plain bearings — Aluminium alloy for solid bearings
|
95.99 | ISO/TC 123 |
Plain bearings — Aluminium alloys for solid bearings
|
95.99 | ISO/TC 123/SC 2 |
Plain bearings — Aluminium alloys for solid bearings
|
90.60 | ISO/TC 123/SC 2 |
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 1: Technical conditions for inspection and delivery
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery
|
90.93 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 2: Mechanical properties
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 2: Mechanical properties
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties
|
90.93 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 3: Strips — Tolerances on shape and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions
|
90.93 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy sheets, strips and plates — Part 4: Sheets and plates — Tolerances on form and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions
|
90.93 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 5: Chemical composition
|
90.93 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery
|
60.60 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
|
60.60 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on dimensions and form
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Tolerances on form and dimensions for extruded rectangular bars
|
60.60 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 4: Extruded profiles — Tolerances on shape and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Tolerances on form and dimensions for profiles
|
60.60 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 5: Extruded round, square and hexagonal bars — Tolerances on form and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 5: Extruded round, square and hexagonal bars — Tolerances on shape and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Tolerances on form and dimensions for round, square and hexagonal bars
|
60.60 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions
|
90.92 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Tolerances on form and dimensions for round, square, rectangular and hexagonal tubes
|
50.00 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
|
60.60 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 1: Technical conditions for inspection and delivery
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1: Technical conditions for inspection and delivery
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1: Technical conditions for inspection and delivery
|
60.60 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 2: Mechanical properties
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars and tubes and wires — Part 2: Mechanical properties
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 2: Mechanical properties
|
60.60 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 3: Drawn round bars and wires — Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter)
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 3: Tolerances on form and dimensions for drawn rods/bars and wires
|
60.60 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 4: Drawn rectangular bars — Tolerances on form and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 4: Drawn rectangular bars and wires — Tolerances on form and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 4: Tolerances on form and dimensions for drawn rectangular bars and wires
|
60.60 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes — Part 5: Drawn square and hexagonal bars — Tolerances on form and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 5: Drawn square and hexagonal bars and wires — Tolerances on form and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 5: Tolerances on form and dimensions for drawn square and hexagonal bars and wires
|
60.60 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 6: Drawn round tubes — Tolerances on form and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 6: Tolerances on form and dimensions for drawn round tubes
|
60.60 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloy cold-drawn wire — Part 1: Technical conditions for inspection and delivery
|
95.99 | ISO/TC 79/SC 6 |
Aluminium and aluminium alloys — Foil and thin strip — Dimensional tolerances
|
95.99 | ISO/TC 79/SC 6 |
Aluminium and aluminium alloys — Foil and thin strip — Dimensional tolerances
|
90.93 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Extruded round bars — Tolerances on shape and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Wrought aluminium and aluminium alloys — Drawn round bars — Tolerances on shape and dimensions (All minus tolerances on diameter)
|
95.99 | ISO/TC 79/SC 6 |
Aluminium alloy castings produced by gravity, sand, or chill casting, or by related processes — General conditions for inspection and delivery
|
95.99 | ISO/TC 79/SC 7 |
Wrought aluminium and aluminium alloys — Sheet — Tolerances on shape and dimensions
|
95.99 | ISO/TC 79/SC 6 |
Petroleum and natural gas industries — Aluminium alloy pipe for use as tubing for wells
|
90.93 | ISO/TC 67 |
Petroleum and natural gas industries — Aluminium alloy drill pipe
|
95.99 | ISO/TC 67 |
Petroleum and natural gas industries — Aluminium alloy drill pipe
|
95.99 | ISO/TC 67 |
Petroleum and natural gas industries — Aluminium alloy drill pipe
|
90.93 | ISO/TC 67 |
Petroleum and natural gas industries — Aluminium alloy drill pipe thread connection gauging
|
90.93 | ISO/TC 67 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.