Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Pipes and fittings of plastics materials — Socket fittings with spigot ends for domestic and industrial waste pipes — Basic dimensions : Metric series
|
95.99 | ISO/TC 138 |
Buried unplasticized polyvinyl chloride (PVC) pipes for the supply of gaseous fuels — Metric series — Specification
|
95.99 | ISO/TC 138/SC 4 |
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications
|
95.99 | ISO/TC 138/SC 2 |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for buried drainage and sewerage systems — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General
|
90.92 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes
|
90.92 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
|
90.92 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
|
95.99 | ISO/TC 138/SC 7 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
|
60.60 | ISO/TC 138/SC 7 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 5: Fitness for purpose of the system
|
60.60 | ISO/TC 138/SC 4 |
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specification
|
95.99 | ISO/TC 138/SC 4 |
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications
|
95.99 | ISO/TC 138/SC 4 |
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 4 |
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications
|
95.99 | ISO/TC 138/SC 4 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
|
90.93 | ISO/TC 138/SC 4 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
|
90.93 | ISO/TC 138/SC 4 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
|
90.93 | ISO/TC 138/SC 4 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 4: Code of practice for design, handling and installation
|
90.93 | ISO/TC 138/SC 4 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specification
|
95.99 | ISO/TC 138/SC 4 |
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specifications
|
95.99 | ISO/TC 138/SC 4 |
Thermoplastics valves — Connection references
|
95.99 | ISO/TC 138/SC 7 |
Unplasticized polyvinyl chloride (PVC-U) valves for pipes under pressure — Basic dimensions — Metric series
|
95.99 | ISO/TC 138/SC 7 |
Road vehicles — Thermoplastic tubing for use in air braking systems — Part 1: Dimensions and marking
|
95.99 | ISO/TC 22 |
Road vehicles — Thermoplastics tubing for air braking systems — Part 1: Dimensions and marking
|
95.99 | ISO/TC 22 |
Road vehicles — Thermoplastics tubing for air braking systems — Part 2: Mounting on vehicle and test methods
|
95.99 | ISO/TC 22 |
Road vehicles — Thermoplastics tubing for use in air braking systems — Part 2: Installation on the vehicle and test methods
|
95.99 | ISO/TC 22 |
Road vehicles — Thermoplastics tubing for air braking systems — Part 2: Mounting on vehicle and test methods — Technical Corrigendum 1
|
95.99 | ISO/TC 22 |
Road vehicles — Thermoplastics tubing for air braking systems
|
90.93 | ISO/TC 22/SC 33 |
Polypropylene (PP) pipes and fittings (jointed by means of elastomeric sealing rings) for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Acrylonitrile/butadiene/styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 2
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 4 |
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 2
|
95.99 | ISO/TC 138/SC 4 |
Thermoplastics valves — Torque — Test method
|
95.99 | ISO/TC 138/SC 7 |
Thermoplastics valves — Torque — Test method
|
60.60 | ISO/TC 138/SC 7 |
Polypropylene (PP) valves for pipes under pressure — Basic dimensions — Metric series
|
95.99 | ISO/TC 138/SC 7 |
Thermoplastics valves — Fatigue strength — Test method
|
95.99 | ISO/TC 138/SC 7 |
Thermoplastics valves — Fatigue strength — Test method
|
60.60 | ISO/TC 138/SC 7 |
High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Polyethylene (PE) pipes for irrigation laterals — Specifications
|
95.99 | ISO/TC 138/SC 2 |
Plastics pipes for the transport of water intended for human consumption — Extractability of constituents — Test method
|
95.99 | ISO/TC 138/SC 5 |
Polyethylene (PE) 25 pipes for irrigation laterals — Susceptibility to environmental stress-cracking induced by insert-type fittings — Test method and specification
|
95.99 | ISO/TC 138/SC 2 |
Thermoplastics valves — Pressure test methods and requirements — Part 1: General
|
95.99 | ISO/TC 138/SC 7 |
Thermoplastics valves for industrial applications — Pressure test methods and requirements — Part 1: General
|
90.20 | ISO/TC 138/SC 7 |
Thermoplastics valves — Pressure test methods and requirements — Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves
|
95.99 | ISO/TC 138/SC 7 |
Thermoplastics valves — Pressure test methods and requirements — Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 7 |
Thermoplastics valves for industrial applications — Pressure test methods and requirements — Part 2: Test conditions and basic requirements
|
90.93 | ISO/TC 138/SC 7 |
Solar water heaters — Elastomeric materials for absorbers, connecting pipes and fittings — Method of assessment
|
90.20 | ISO/TC 180 |
Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings
|
95.99 | ISO/TC 138/SC 4 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm
|
95.99 | ISO/TC 138/SC 4 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Part 4: Valves
|
95.99 | ISO/TC 138/SC 7 |
Polyethylene (PE) valves for gas distribution systems
|
95.99 | ISO/TC 138/SC 7 |
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
|
60.60 | ISO/TC 45/SC 1 |
Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications
|
95.99 | ISO/TC 45/SC 1 |
Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications
|
95.99 | ISO/TC 45/SC 1 |
Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications
|
60.60 | ISO/TC 45/SC 1 |
Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applications
|
95.99 | ISO/TC 45/SC 1 |
Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applications
|
90.93 | ISO/TC 45/SC 1 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials
|
90.60 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture — Technical Corrigendum 1
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
|
90.60 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design — Technical Corrigendum 1
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
|
90.60 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation — Technical Corrigendum 1
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
|
90.60 | ISO/TC 67/SC 6 |
Ships and marine technology — Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
|
90.93 | ISO/TC 8/SC 3 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General — Amendment 1
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
|
60.60 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes — Amendment 1
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
|
90.92 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
|
60.00 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings — Amendment 1
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
|
90.92 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
|
50.20 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
|
95.99 | ISO/TC 138/SC 7 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
|
90.92 | ISO/TC 138/SC 7 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
|
40.60 | ISO/TC 138/SC 7 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
|
60.60 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
|
60.60 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 7: Assessment of conformity
|
60.60 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 8: Training and assessment of fusion operators
|
60.60 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 1: General
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 6: Code of practice for design, handling and installation
|
95.99 | ISO/TC 138/SC 4 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.