International Standard
ISO/TS 10811-2:2000
Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 2: Classification
Reference number
ISO/TS 10811-2:2000
Версия 1
International Standard
ISO/TS 10811-2:2000
недоступно на русском языке
Опубликовано (Версия 1, 2000)
Последний раз этот стандарт был пересмотрен в  2024. Поэтому данная версия остается актуальной.

ISO/TS 10811-2:2000

ISO/TS 10811-2:2000
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта


This part of ISO/TS 10811 defines a method for the classification of shock and vibration in buildings from

measurements in accordance with ISO/TS 10811-1. A classification system of environmental vibration conditions

should serve as guidelines for designers, manufacturers and users of equipment sensitive to shock and vibration,

and for building constructors.

The types of shock and vibration considered are those transmitted from floors, tables, walls, ceilings or isolation

systems into an equipment unit. They can be generated by the following:

a) external sources, for example traffic (by road, rail or air), or building and construction activities such as

blasting, piling and vibratory compaction; the vibration response to sonic booms and acoustical excitations is

also included, as well as weather-induced vibration;

b) equipment for indoor use, such as punch presses, forging hammers, rotary equipment (air compressors, air

conditioner systems, etc.) and heavy equipment transported or operated inside a building;

c) human activities in connection with the service or operation of the equipment, for example, people walking,

especially on raised floors.

The frequency range of interest is normally 2 Hz to 200 Hz. Normally the dominant frequencies are less than

100 Hz because they represent the response of the elements in the building.

This part of ISO/TS 10811 deals only with vibration from a maximum amplitude point of view. The concept of

vibration dose (for example as for estimation of fatigue life) is not treated.

Общая информация

  •  : Опубликовано
     : 2000-06
    : Подтверждение действия между-народного стандарта [90.93]
  •  : 1
  • ISO/TC 108/SC 2
    17.160  91.120.25 
  • RSS обновления

Жизненный цикл

Цели в области устойчивого развития

Данный стандарт разработан для достижения следующих Цель устойчивого развития

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)