Тезис
PreviewThis document provides standard test methods for determining the vertical load, axial load and torsional moment capacity as well as deflection characteristics of preformed three-dimensional joist hangers that are used primarily for securing one timber member to another (the header can be concrete or masonry). The joist hangers primarily transfer vertical loads from the supported member to the supporting member, but they can also be required to transfer axial loads from the supported member to the supporting member.
NOTE 1 Structural steel sections can also be substituted as the header, but are not covered in this document.
NOTE 2 One secondary mechanism to be considered is the effect of rotation of the supported member about its longitudinal axis on the joist hanger.
-
Текущий статус: ОпубликованоДата публикации: 2018-09
-
Версия: 1
-
- ICS :
- 91.080.20 Timber structures
Приобрести данный стандарт
Формат | Язык | |
---|---|---|
std 1 92 | ||
std 2 92 | Бумажный |
- CHF92
Жизненный цикл
-
Сейчас
ОпубликованоISO 19323:2018
Стандарт, который пересматривается каждые 5 лет
Этап: 90.20 (Hа стадии пересмотра)-
00
Предварительная стадия
-
10
Стадия, связанная с внесением предложения
-
20
Подготовительная стадия
-
30
Стадия, связанная с подготовкой проекта комитета
-
40
Стадия, связанная с рассмотрением проекта международного стандарта
-
50
Стадия, на которой осуществляется принятие стандарта
-
60
Стадия, на которой осуществляется публикация
-
90
Стадия пересмотра
-
95
Стадия, на которой осуществляется отмена стандарта
-
00
Появились вопросы?
Ознакомьтесь с FAQ
Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)